專注精密測量行業20年！Focus on R&D of precision measurement instruments since 1999,
通過ISO9001:2000國際質量體系認證；ISO9001:2000 qualified
通過高新技術企業認證；High and new technology enterprise qualified
圓度儀國家標準的起草單位；National standard participant of roundness meter
通過出口歐盟CE認證；CE Certificated
產品多樣化：可根據客戶需要訂做；Wide-variety Product, and customizable
儀器測量原理Measurement Principle
采用半徑測量法，工件旋轉式。采用高精度氣浮主軸作為基準；運用進口精密圓光柵、精密電感位移傳感器和計算機組成。對被測工件進行計量角度、徑向位移量，保證測量工件的角位移、徑向值的精確度；測量軟件采用基于中文版Windows操作系統平臺的CA系統測量軟件，完成數據采集、數據處理及打印輸出等工作。
● Roundness and Cylindricity Measurements
● Workpiece rotation
● High precision air floating spindle
● Advanced computer, imported encoder ,accuracy inductive transducer
● Windows based software for data acquisition, process and printing.
測量功能Main Function
圓柱度儀、圓度、直線度、同軸度、同心度、跳動量、垂直度、平行度、平面度、壁厚差，錐度對稱度，表面波紋度(Wc、Wp、Wv、Wt、Wa、Wq)、頻譜分析、波高分析等。
圓度評定方式(4種)：zui小區域法、zui小二乘法、zui小外接圓法、zui大內切圓
圓度濾波方式：1、1-500、1-150、1-50、1-15、15-500
波紋度濾波方式：3-16、3-17、15-500、17-100
濾波形式：高斯（ISO標準）
Roundness, coaxiality, concentricity, pulsation, verticality, parallelism, flatness, surface waviness (Wc, Wp, Wv, Wt, Wa, Wq), spectrum analysis, wave height analysis, etc.
Roundness evaluation methods (4 kinds): minimum area method, least square method, minimum circumscribed circle method, maximum tangent circle method
Roundness filter gear: 1、1-500、1-150、1-50、1-15、15-500
Wave filtering methods: 3-16, 3-17, 15-500, 17-100
Filtering Form: Gauss (ISO Standard)
技術參數Main Parameters
| 項目 Item | 參數 Parameter | |
| 測量范圍 | zui大直徑 | Ф420mm |
| measuring range | Max. dia. | |
| zui小內徑 | ф5mm | |
| Min. inner dia | ||
| zui大高度 | 450mm | |
| Max height | ||
| 主軸精度 | 徑向誤差 | ±(0.025+5H/10000)μm |
| Spindle accuracy | Radial error | |
| 軸向誤差 | ±(0.025+6X/10000)μm | |
| Axial error | ||
| 回轉軸線與Z軸導軌平行度 | 2μm/300mm（母線基準） | |
| Parallelism between Rotary Axis and Z-Axis Guideway | ||
| 工作臺 | 臺面直徑Table dia. | Φ200mm |
| Workbench | 回轉直徑Rotation dia. | Φ420mm |
| 承載重量Load Wt. | 30Kg | |
| 調整范圍 | 調偏心±2mm ; 調水平±1° | |
| Adjustment range | Adjust the eccentricity ±2mm; adjust the level ±1° | |
| 旋轉速度spinning speed | 0-12 rpm | |
| 立柱 | 直線度（窄范圍） | 0.35μm /100mm |
| 直線度（全范圍） | 0.8μm /300mm | |
| 產地Origin | 美國MicroE （America）分辨率0.1μm | |
| 運動方式 | 電動/自動接觸 | |
| 水平臂 | 水平移動距離 | 160mm |
| Horizontal arm | Horizontal moving distance | |
| 移動速度Moving speed | 0.5-6mm/s 或手動 0.5-6mm/s or manual | |
| 產地Origin | 美國MicroE （America）分辨率0.1μm | |
| 運動方式 | 手動/自動接觸 | |
| 傳感器 | 量程range | 500μm (半徑差) 500μm (radius difference) |
| sensor | 分辨率Resolution | 0.005μm |
| 測針形狀 | φ2mm寶石球測頭（有更多直徑可選擇） | |
| Stylus shape | φ2mmRuby tip (φ1mm、φ0.5mmoptional) | |
| 測力 | 1-12g | |
| Force measurement | ||
| 數據采集 | 進口光柵8192點/周 | |
| Data acquisition | Imported grating 8192 points/cycle | |
| 放大倍率 | 任意至zui大20萬倍 | |
| Magnification | Arbitrary to maximum 200,000 times | |
| 氣源壓力Air Source | 0.45～0.80Mpa | |
| 氣源流量Air consumption | ≥0.2 m³/min | |
| 電源Power | AC 220V±10% 50Hz | |
| 環境要求Environmental conditions | 溫度(T)：10～30℃；相對濕度(RH)：＜85% | |
技術亮點Technical highlights
采用高精密氣浮主軸，永不磨損，保持長久精度
High-precision air-floating spindle, never wear, long-term accuracy
數據采集運用進口精密圓光柵、準確度高，穩定性好
Data acquisition by high precision encoder with high accuracy and good stability
部分圓弧亦可測量處理
Part of the arc can also be measured and processed
自動識別輪廓間斷，自動或手動剔除功能
Automatic identification of contour discontinuities, with automatic or manual elimination function
軟件支持中英文一鍵切換
Software supports one-click switching between Chinese and English
支持winXP、win7系統
Support winXP, win7 system
設備尺寸Equipment size
|
產品（Product） |
包裝(Packing) |
總重量 (Wt.kg) |
體積 （CBM m³） |
||||||
|
Lx |
Ly |
Lz |
Wt(kg) |
Lx |
Ly |
Lz |
Wt(kg) |
||
|
960 |
650 |
1550 |
240 |
1000 |
750 |
1650 |
50 |
290 |
1.23 |
使用要求Usage requirement
空壓機氣源壓力：0.45～0.80Mpa Air supply: 0.45～0.80Mpa
空壓機氣源流量：≥0.2m3/min Air flux: ≥0.2 m³/min
功率需求：約500W；交流220V±10%，50Hz Power supply: AC 220V±10% 50Hz
環境要求：溫度：10～30℃；相對濕度：＜85%
Environment requirements: Temperature: 10～30℃; RH: ＜85%
安裝地點無明顯振源 No obvious vibration
單獨地線 Separated ground wire
主要配置Main configuration
安裝、驗收
1、安裝與培訓
1.1我公司負責在用戶現場對設備行進安裝和調試；
Supplier is responsible for Installation and testing on user site.
1.2在設備安裝調試時對買方技術人員進行理論、實際操作及維修等培訓，使用戶技術人員掌握設備操作，能熟練使用設備進行檢定工作，保證設備正常運行并能排除設備的一般故障和特殊保養。.
The user will be trained in theory, operation and maintenance during installation, to that the user could operate the equipment skillful, and could solve the general trouble and make routine maintenance.
2、驗收
2.1驗收標準：按現行國家檢定規程以及合同技術協議為準。
Acceptance criteria: According to the current national verification procedure and the technical agreement of the contract.
2.2驗收項目：核對該設備的供貨清單，如有漏項和短缺，我司負責免費補齊。
Acceptance items: check the supply list of the equipment. If there are any missing items or shortages, our company will make up for them free of charge.
售后服務
質保期：設備安裝驗收合格之日起12個月內，但不超過發貨之日起15個月。
Warranty period: 12 months from the date of equipment installation and acceptance, but not more than 15 months from the date of shipment.
質保期內：實行“三包”政策，公司負責為用戶免費提供計量測試技術咨詢服務。
Warranty period: Three guarantees, meanwhile providing free testing or technology consulting
質保期外：我公司提供終身優惠服務和技術支持，設備出現故障需要修理時，所換零件按成本價收取。我司有備品備件庫，終身負責為用戶以成本價提供備品備件服務。
After warranty: Providing service and support for life, and spare part with the best price, and if hardware support, the software updating free of charge.
服務響應時間：接到故障請求電話后，2小時內回應，我司通過電話、微信或郵件的方式指導買方排除故障；若故障仍不能排除，將在72小時內派技術人員上門解決問題。
Service response time: within 5 hours upon receipt of the fault request call, our company will guide the buyer to troubleshoot the fault by phone, WeChat or email. If the fault cannot be removed, technicians will be sent to solve the problem within 72 hours.